| "Danger, Will Robinson!" |
|---|
|
Contents |
On performing any of above methods of formatting the phone, device will ask you for a security/lock code. Default code is 12345.
Data stored on E: drive (MMC) will not be affected by these sequences.
You can also try for the alternative approach.
* Switch Off the device. * Press and Hold down the keys Green/Talk + 3 + *. * Switch On the device. * If everything goes well then you will see "Formatting" screen.
Note: Please make sure that your device is fully charged before you proceed with formatting the device. If the battery goes down during this procedure, It may result in inconsistent state of your device.
Before format a S60 handset be sure that you have a made a backup of the phone memory. Either with the build in backup program of your device or with the program Content Copier of the Nokia PC Suite. For a strong backup procedure, make a backup with both programs before format the device.
To format a S60 device follow this wiki link.
When the device is back do one of the following steps:
A few programs and in this case that means only the program binaries and resources are not backed up by the backup process. Install this program in the newest version after restoring the device phone memory.
If JavaME programs installed on the device, e.g. enhanced S60 calculator, widsets or GMail Client for S60, use the MIDlet Restore program to reactivate this programs. Now reinstall is needed, only run this program. This process takes a fews minutes or longer if you have many JavaME programs.
The connected Bluetooth devices list are also not included in the backup. So register this devices after the restore, e.g.
After all this actions, to as last action an final restart oh the device.
No related wiki articles found