This page was last modified 07:28, 11 January 2008.
TSS000801 - Setting WLAN channel and data rate
From Forum Nokia Wiki
| ID | TSS000801 | Creation date | January 11, 2008 |
| Platform | S60 3rd Edition , S60 3rd Edition FP1 | Devices | |
| Category | Symbian C++ | Subcategory | WLAN |
Description
The data transfer rate is adjusted automatically based on the WLAN AP and network conditions. There are currently no APIs to change the behavior.
Setting the WLAN channel is possible only in an IBSS (ad-hoc) network. The channel is selected automatically in infrastructure mode based on the WLAN AP. In IBSS mode the channel (WLAN_CHANNEL_ID) is set in the WLANService Table in the comms database.
Furthermore, if you want to change the channel on the fly, the only option is to close the IAP, modify the channel in WLAN service table, and start the IAP again. The channel cannot be changed on the fly.
The basic/supported rates are currently hard-coded in ad-hoc mode.
| Related Discussions | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| WLAN-How to get BSSID of active connection | zdenko | Symbian Networking & Messaging | 1 | 2008-03-12 15:44 |
| E-90: Not connecting to WLAN | hsahuja333 | Wired and Wireless interfaces | 1 | 2007-09-30 09:05 |
| How do detect if phone supports WLAN and what is the MAC address? | nly | VoIP | 0 | 2006-12-19 01:12 |
| Pin Code problem --heelp | xptux | Multimodecards | 3 | 2003-06-03 11:57 |
| Problems with voice files on Nokia 6600 | paultreadaway | Audio | 6 | 2004-05-19 03:35 |
