From Forum Nokia Wiki

ID	TSS001473	Creation date	October 30, 2009
Platform	S60 3rd Edition, FP2 S60 5th Edition	Devices	Tested on: Nokia N78, Nokia N96, Nokia 5800 XpressMusic
Category	Symbian C++	Subcategory	Base/System, Networking

Keywords (APIs, classes, methods, functions):

Description

A WLAN Access Point can be created using OMA Client Provisioning which is shown in the Local Client Provisioning plug-in. This article shows you how this can be extended to provision advanced WLAN settings, such as WEP key, ASCII pre-shared key, and EAP.

Solution

Setting WEP key format
 
 <characteristic type="NAPDEF">
  <parm name="NAPID" value="NAP1"/>
  <parm name="BEARER" value="WLAN"/>
  <parm name="NAME" value="WEP WLAN"/>
  <characteristic type="WLAN">
    <parm name="PRI-SSID" value="MYWLAN"/>
    <parm name="NETMODE" value="INFRA"/>
    <parm name="SECMODE" value="WEP"/>
    <parm name="WEPAUTHMODE" value="OPEN"/>
    <parm name="WEPKEYIND" value="0"/>
    <characteristic type="WEPKEY">
      <parm name="LENGTH" value="128"/>
      <parm name="INDEX" value="0"/>
      <parm name="DATA" value="5F89AE0A3B9D5C1123F81F0A41"/>
    </characteristic>
  </characteristic>
 </characteristic>
 
Setting WPA-PRES-KEY-ASC for SECMODE="8021X" 
 
 <characteristic type="NAPDEF">
  <parm name="NAPID" value="NAP1"/>
  <parm name="BEARER" value="WLAN"/>
  <parm name="NAME" value="MY WLAN"/>
  <characteristic type="WLAN">
    <parm name="PRI-SSID" value="MYWLAN"/>
    <parm name="NETMODE" value="INFRA"/>
    <parm name="SECMODE" value="8021X"/>
    <parm name="WPA-PRES-KEY-ASC" value="secretexamplepswd"/>
  </characteristic>
 </characteristic>
 
 
Setting MSCHAPV2 for EAP-PEAP
 
 <characteristic type="NAPDEF">
  <parm name="NAPID" value="NAP1"/>
  <parm name="BEARER" value="WLAN"/>
  <parm name="NAME" value="MY WLAN"/>
  <characteristic type="WLAN">
    <parm name="PRI-SSID" value="MYWLAN"/>
    <parm name="NETMODE" value="INFRA"/>
    <parm name="SECMODE" value="WPA"/>
    <characteristic type="EAP">
      <parm name="EAPTYPE" value="EAP-MSCHAPV2"/>
      <parm name="USERNAME" value="yourusername"/>
      <param name="PASSWORD" value="yourpassword"/>
      <param name="REALM" value="0"/>
      <parm name="ENCAPS" value="EAP-PEAP"/>
    </characteristic>
  </characteristic>
 </characteristic>